CERAMICO Instagram

Technology · How it works

The page that stays put: how a Kindle’s ink holds an image with no power at all

Inside an e-reader’s screen, millions of capsules hold charged black and white specks that move once and then simply stay. That is why the page costs nothing to keep.

The Page That Stays Put: cover frame from the CERAMICO filmWatch the film · 1:02

Cut the power to the ink in a Kindle’s screen and the page you were reading does not fade to black. It just stays.

Most screens you own make their own light and need power to show anything at all. The ink in a Kindle’s screen behaves more like a printed page. Once a word is set, it stays set, at no cost.

That is not a figure of speech. E Ink, the company that makes the electronic ink used in Kindle screens, states it directly: “No power is needed to hold an image.” It even has a name for the property, bistability, which it defines as an image on an E Ink screen being retained “even when all power sources are removed.”

By the numbers

Capsule size
about a human hair in diameter
Capsules in the ink
millions
Particle colors per capsule
2 black and white
Power to hold an image
none
First Kindle announced
2007
Carta chosen for Kindle Paperwhite
2013

Capsule and power figures are E Ink’s own, for its black-and-white two-particle ink. They describe the ink layer, not a Kindle’s front light.

A page that costs nothing to keep

In practice, E Ink says, this means the display draws power only when something changes. On an e-reader, the company spells out what that looks like: “power is only needed when turning to a new page but no power is consumed by the display while reading the page.” Even then, only the regions of the screen that are changing need updating.

There is a careful distinction to make here, and our film’s first line makes it. The claim is about the ink. Every current Kindle also has a front light, and that light uses power whenever it is on. The device itself still draws power, too. What costs nothing is the ink holding the picture still.

So how does a screen hold a picture with nothing pushing it? The answer is in what the ink is made of.

Inside the capsules

E Ink describes its black-and-white ink as “millions of tiny microcapsules, each about the diameter of a human hair.” Each capsule is a tiny sealed bubble. Inside, white particles and black particles are suspended in a clear fluid.

The two kinds of particle carry opposite electric charges. (Which is which depends on where you look: E Ink’s own page describes the polarity one way in its technical description and the other way in its FAQ, so we will stick to “opposite.”) Beneath and above the capsules sit electrodes. Apply a field one way and, as E Ink puts it, the corresponding particles move to the top of the microcapsule, where they become visible. Flip the field and the other color rises instead.

White on top, and that spot looks like paper. Black on top, and it looks like ink. Arrange enough of those spots and you have a letter, then a word, then a page.

Then the voltage switches off, and nothing happens. That is the point. The particles have nowhere they need to be, so they simply stay put. E Ink: “No power is required to maintain an image after it has been updated.” The page you see is a physical arrangement of specks, parked where the last voltage left them.

The page you see is a physical arrangement of specks, parked where the last voltage left them.

One honest caveat about “stay put.” Readers on enthusiast forums report that an image left for weeks can slowly lose a little contrast. Those reports are anecdotal and unmeasured, and nothing we found contradicts E Ink’s claim that the image survives with the power cut. But “holding still” is a better description than “holding perfectly still.”

Not every E Ink screen works this way, either. The capsule design belongs to the company’s two-particle black-and-white ink. E Ink’s own page notes that some of its color products, such as Spectra 3000, use a different structure it calls Microcup instead of capsules.

The film · 1:02

The Page That Stays Put

A clay e-reader with its cable cut keeps its page readable, as the film dives into the capsules of ink that hold it there.

Watch more on Instagram Follow CERAMICO

Read the transcript

The ink on your Kindle's screen needs no power to hold this page. E Ink, which makes the ink in Kindle screens, says the image stays with power removed. The page itself doesn't glow. In 2007, Amazon said Kindle's screen worked using ink. E Ink says its black-and-white ink is millions of tiny capsules, each about a hair wide. Inside each one, black and white specks float in a clear liquid. The specks carry opposite charges, so a voltage can pull either colour to the top. White on top looks like paper. Black on top looks like ink. Then the voltage switches off, and the specks simply stay put. That's why E Ink says its screen only uses power when the page changes. And with no backlight, it bounces room light back, just like paper. So unlike a glowing screen, more sunlight just makes it look brighter. Ink specks holding still, until you turn the page.

Animated model, illustrative and not to scale.

Light from the room

The second thing that sets the page apart is where its light comes from. A phone screen is what E Ink calls an emissive display: light from a backlight is projected through it toward your eyes. An E Ink page has no backlight. In E Ink’s words, it reflects “the ambient light in a room, exactly like printed paper.”

That has a pleasing consequence. A glowing screen fights the sun and tends to lose. A reflective one is helped by it. E Ink: “As with any reflective surface, the more ambient light, the brighter the display looks.” Step from a shady room onto a sunny balcony and the page does not wash out; it gets easier to read.

Amazon made the same pitch when it introduced the first Kindle in November 2007. Its announcement said the screen “works using ink, just like books and newspapers, but displays the ink particles electronically,” that it uses no backlight, and that it reads like real paper, even in bright sunlight.

Today’s front lights complicate the picture slightly, but not much. A front light is not a backlight, and with it switched off, the page is back to bouncing room light. Either way, the ink itself never glows.

From the first Kindle to today

The link between Kindle and E Ink is well documented, though the paper trail thins as it nears the present. In 2013, E Ink announced its Carta display and said that “Amazon has selected the Carta display for its new Kindle Paperwhite eReader.” E Ink also says that its Carta films use the two-particle system described above. For more recent hardware, we are relying on independent reviewers: TechRadar’s review of the 2024 Kindle Paperwhite lists its display type as E Ink Carta 1300. We found no Amazon or E Ink page from the last few years that names the panel in current Kindles, so we would not claim more than that.

Still, the principle has barely changed since the first Kindle shipped. A page of ink is a pile of tiny charged specks, pushed into place once, then left alone. Turn the page and a ripple of voltage rearranges only the specks that need to move. Stop turning, and the screen goes quiet, holding your place on the nightstand until the morning.

Sources

Every line in the film was checked against these sources by an independent fact-checker before publication. Company claims are attributed to the company that made them.

  1. E Ink: Electronic ink, how it works
  2. E Ink: Benefits
  3. E Ink: E Ink introduces Carta, the next generation of electronic ink display technology (2013)
  4. Amazon: Introducing Amazon Kindle (2007)
  5. TechRadar: Amazon Kindle Paperwhite (2024) review

Updates and corrections

  • First published.

See an error? Tell us. We correct promptly and say what changed. Our corrections policy.

Disclosure

This is an independent explainer. CERAMICO is not affiliated with, sponsored by, or speaking for any company, brand, agency or person named in this story, and nothing here is official.

Claims are attributed. Where a figure or description comes from a company or an expert, we say so. CERAMICO is not affiliated with, or endorsed by, Amazon, Kindle or E Ink. Brand names identify the products only. The animation is an illustrative model, not to scale.

Animations are illustrative. Our films use clay-style 3D models. They are not to scale and are simplified to show how something works.

Trademarks and product names belong to their owners and are used only to identify what we are describing.